|
|
|
|
| Introduction |
Honing is defined as a precision honing method to carry out grinding work of a workpiece in contact with the surface of honing stones in an abundance of coolant while simutaneously providing the honing stones with rotating and reciprocating movements and also applying pressure on the inner surface of a hole.
With the honing stones brought into contact with the workpiece reciprocating and pressurizing (expanding) one or a few bar-shaped honing stones fitted into a body called mandrel (or honing head).Accordingly.unique cross-hatching(mesh pattern) is formed on the honed surface.
Our Honing Stones are designed to used on Sunnen,Gehring,Nagel.Nissin and other types of honing machines.We can supply a complete line of Sunnen types honing tools.(honing stone,mandrel,wedges,retainer,adapter)
Features:
- Out performs ordinary stone in cutting action,finish speed and wear resistence.
- Superior performance with increased efficiencies perfect for any size operation.
- Low production cost,high precision and long workpiece life.
- Our honing stones can honed the bore diameter smallest to 1.5mm(0.6inches)
|
| |
| Materials to be Honed |
Diamond Honing Stone-
Avery hard abrasive grain,which is essential to the honing of Carbide,Cast Iron,Glass,Brass,Bronze and Ceramic materials.Designated by the letter "D" in stone code.
CBN Honing Stone
A man-made abrasive(cubic boron nitride)especialy usefull for honing the tough Alloy Steel,Tool Steel,Die Steel,Harden Steel and other abrasive resistant materials.Designated by the letter"N" in stone code. |
| |
| Bore types (Bore description and honing unit requirements) |
Bore diameter smallest to 1.5mm
|
| Open holes with no interruptions |
 |
|
|
| Select a honing unit with stone length2/3 to 3/2 times bore length.If honing units shown have stone length too long or too short,please contact us |
| |
| Open holes with keyway or splines |
|
|
|
| Bores with interruptions such as these require keyway honing units,Stone shoud be 2/3 to 3/2 times bore length.For such bores,special-purpose stones shoud be used. |
| |
| Open holes with tandem lands |
|
|
|
| Tandem bores require a stone length at least twice the distance,special honing stone shoud be used |
| |
| Blind holes |
|
|
|
| Select a Honing units with stone length 2/3 times bore length,if the honing stone length too long,please don’t shorten it.Be sure shank is long enough to permit stone to reach bottom in hole. |
|
| |
| Our honing stones can support Gehring,Nagel,Sunnen,Nissin,Ari-Hone and other types of Honing machines.Special purpose honing stone can be available upon request. |
| |
| |
|
